A Premium Garage Design

Our premier range of wooden Garages goes that little bit further in the design features. The Chester Garage is our flagship range, offering substantial enhancements over and above the Chart Range.


Roof Trusses To BS Standard

The roof trusses are designed to BS standard, spaced at 600mm centres with wind bracing and metalwork, pitched at 22.5 degree pitch with felt tiles underlined with 18mm ply roofing boards.

Thicker Exterior Cladding

The Shiplap cladding used on a Chester Garage measures slightly thicker than that on a Chart Garage at 19mm x 125mm. This helps provide extra insulation for better year round temperature control.

Soffits & Fascias

Chester Garages with specialist roof trusses and Onduvilla or Felt tiles include soffits and fascias fitted to all sides of the building giving a tailored finish.

Onduvilla Tiled Roofing

Onduvilla roof tiles are included as standard on the Chester Garage and you can choose from three different colours (shaded red, shaded brown or black/slate) for something in keeping with your surroundings.

Morticed Ledged & Braced Doors

All Chester Garage doors are high quality, morticed, ledged and braced frame, rebated and infilled with TGV, lined with an eco-breather membrane, set in separate door frames offering a more pleasing aesthetic look to the interior. Single Garages come with one pair of double doors and a side door and double Garages come with two pairs of double doors and a side door. All doors are hung in pressure treated door frames.

Optional Extras

The following features are available as optional extras for this particular range:


If preferred you can replace the side-hinged double doors with sectional or automated roller shutter doors.

Upgrade Windows & Side Doors

A wide choice of single and double glazed windows is available. Additional personal doors or French Doors can be included in your preferred design of building. See our brochure for the full range available.


Insulation and lining can be supplied for your Garage. This can be particularly useful if you intend to adapt part of your building into an Office or Store Room.

Alternative Exterior Cladding

Weatherboard and Loglap exterior cladding are available.

Roofing Options

As standard, Chester Garage roofs come fitted with a Onduvilla tiles, however, you can choose to upgrade the pitch of your roof to take a slate, clay tiled or cedar shingles roof should you wish at additional cost.

Roof Design

Chester Garages come with a straight gable-to-gable roof as standard, but this roofing style can altered to incorporate full hips or barn hips to be in keeping with surrounding buildings.

  Chester Range Chester Range
Main Features Optional Extras
Structure 2.5m to eaves
Pressure treated timbers externally and internally (excluding trusses)
Framing 100mm x 50mm (4” x 2”) prepared timber framing
Design Changes Designs are very varied including Offices or Workshops, straight or ‘L’ shaped buildings
Doors & Frames 913mm (36”) wide personal door
Morticed, ledged and braced frame, rebated and infilled with T.G.V measuring 2286mm (7’ 6”) fitted with a rim lock and pull handle, lockable from inside or out
- All doors hung in pressure treated door frames
Wide selection of joinery grade doors
Windows Not included as standard A range of single or double glazed windows are available
Guttering Soffits, fascias and guttering
Cladding Pressure treated Ex 19mm x 125mm Shiplap exterior cladding Weatherboard and Loglap are available
Roof As standard the roof pitch is 22.5°, boarded with 18mm OS Board and covered with Onduvilla tiles. Felt tiles in red, green, brown or grey
Increased pitch up to 35° to take clay tiles, slate or cedar shingles